2007 - 2014 Chevy Tahoe 5.3L Torque Specs

2008 Chevy Tahoe Brake System Torque Specs

Click the area you are looking for!


Chevy Tahoe 5.3L Repair Information

Chevy Tahoe 5.3L Brake Repair Information

Here you can find information regarding the assembly of the tahoe's braking system. This information will include the procedures to replace and repair certain main components within the system as well as the corresponding torque specs for bolts involved in the parts. The listing of procedures will begin with the most common and move inwards towards the inner parts of the brake system and the least common repairs that are needed.

How to Change the front brakes

Chevy Tahoe front brakes
The front brakes on the Chevy Tahoe are disc brakes just like the rear brakes. Disc brakes uses a series of brake pads that push onto a brake rotor in order to create friction and stop the vehicle. To change the rear brakes on the Tahoe you must first remove the rear wheel and then remove the caliper slide bolts from the caliper. This will allow for the rear caliper to be removed from the brake rotor. Once removed you have access to the rear brake pads. You can simply remove the pads and place new pads in their place. Be sure to align the new pads into the metal holders. From here you can reinstall the rear brake caliper while making sure the pads stay in place. The rear brake caliper slide bolts get torqued down to 75 ft-lbs. If you replace the brake rotor at the same time you will need to reinstall the rear caliper bracket and torque it down to 139 ft-lbs. Since this is a rather higher torque spec I always add some loctite to ensure it stays tightened. If you remove the rear caliper banjo bolt be sure to torque it back up to 30 ft-lbs once done.

Chevy Tahoe Front Caliper Slide Bolts Torque Specs : 75 ft-lbs

Chevy Tahoe Front Caliper Bracket Torque Specs : 139 ft-lbs

Chevy Tahoe Front Caliper Banjo Bolt Torque Specs : 30 ft-lbs

 

How to change the rear brakes

Chevy Tahoe Rear brakes
The rear brakes on the Chevy Tahoe are disc brakes just like the front brakes. Disc brakes uses a series of brake pads that push onto a brake rotor in order to create friction and stop the vehicle. To change the rear brakes on the Tahoe you must first remove the rear wheel and then remove the caliper slide bolts from the caliper. This will allow for the rear caliper to be removed from the brake rotor. Once removed you have access to the rear brake pads. You can simply remove the pads and place new pads in their place. Be sure to align the new pads into the metal holders. From here you can reinstall the rear brake caliper while making sure the pads stay in place. The rear brake caliper slide bolts get torqued down to 31 ft-lbs. If you replace the brake rotor at the same time you will need to reinstall the rear caliper bracket and torque it down to 148 ft-lbs. Since this is a rather higher torque spec I always add some loctite to ensure it stays tightened. If you remove the rear caliper banjo bolt be sure to torque it back up to 30 ft-lbs once done.

Chevy Tahoe Rear Caliper Slide Bolts Torque Specs : 31 ft-lbs

Chevy Tahoe Rear Caliper Bracket Torque Specs : 148 ft-lbs

Chevy Tahoe Rear Caliper Banjo Bolt Torque Specs : 30 ft-lbs

 


Front Brakes Torque Spec
Front Caliper Slide Bolt Torque Spec 75 ft-lbs
Front Caliper Bracket Torque Spec 139 ft-lbs
Front Caliper Banjo Bolt Torque 30 ft-lbs
Rear Brake Torque Specs
Rear Caliper Slide Bolt Torque Spec 31 ft-lbs
Rear Caliper Bracket Torque Spec 148 ft-lbs
Rear Caliper Banjo Bolt Torque 30 ft-lbs